Chapter 27: Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes

Coal, whether or not pulverized, but not agglomerated:

Anthracite

Bituminous coal

Metallurgical coal

Other

Other coal

Sub-bituminous coal

Other

Briquettes, ovoids and similar solid fuels manufactured from coal

Lignite, whether or not pulverized, but not agglomerated

Agglomerated lignite

Peat (including peat litter), whether or not agglomerated

Coke and semicoke of coal:

Coke larger than 100 mm (4 inches) in maximum diameter and at least 50 percent of which is retained on a 100-mm (4-inch) sieve after drop shatter testing pursuant to ASTM D 3038, of a kind used in foundries

Other

Other

Coal gas, water gas, producer gas and similar gases, other than petroleum gases and other gaseous hydrocarbons

Tar distilled from coal, from lignite or from peat, and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars

Benzene

Toluene

Xylenes

m-Xylene

o-Xylene

p-Xylene

Other

Naphthalene

Other aromatic hydrocarbon mixtures of which 65 percent or more by volume (including losses) distills at 250˚C by the ISO 3405 method (equivalent to the ASTM D 86 method)

Other:

Creosote oils

Other:

Light oil

Picolines

Carbazole having a purity of 65 percent or more by weight

Phenols:

Containing more than 50 percent by weight of hydroxybenzene

Metacresol, orthocresol, paracresol and metaparacresol, all the foregoing having a purity of 75 percent or more by weight

Other

Other

Carbon black feedstocks

Other

Pitch

Pitch coke

Testing under 25 degrees A.P.I.

Testing 25 degrees A.P.I. or more

Condensate derived wholly from natural gas

Other

Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils:

Light oils and preparations:

Motor fuel

Gasoline:

Leaded

Unleaded:

Reformulated

Other

Jet fuel, naphtha-type

Other

Motor fuel blending stock

Reformulated blendstock for oxygenate blending (RBOB)

Other

Naphthas (except motor fuel or motor fuel blending stock)

Other:

Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound

Insulating or transformer oils

Renewable fuels blends containing not less than 51 percent by volume of biofuel, as described in statistical note 1 to this chapter

Other

Other

Other:

Distillate and residual fuel oils (including blended fuel oils):

Testing under 25 degrees A.P.I.

Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils):

Containing not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils):

Fuel oil No. 5

Fuel oil No. 6

Other

Other

Testing 25 degrees A.P.I. or more

Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils):

Fuel oils Nos. 2 and 3:

Diesel oil:

Containing not more than 15 ppm of sulfur

Containing more than 15 ppm but not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Other:

Containing not more than 15 ppm of sulfur

Containing more than 15 ppm but not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Other:

Containing not more than 15 ppm of sulfur

Containing more than 15 ppm but not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils):

Containing not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)

Kerosene-type jet fuel

Kerosene (except kerosene-type jet fuel):

Motor fuel

Motor fuel blending stock

Kerosene (except kerosene-type jet fuel

Lubricating oils and greases, with or without additives:

Oils

Aviation engine lubricating oils

Automotive, diesel or marine engine lubricating oils

Turbine lubricating oil, including marine

Automotive gear oils

Steam cylinder oils

Quenching or cutting oils

Other

Greases:

Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin

Other

Other:

Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound

White mineral oil:

Medicinal grade

Other

Insulating or transformer oils

Other

Other

Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils:

Distillate and residual fuel oils (including blended fuel oils):

Testing under 25 degrees A.P.I.

Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils)

Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)

Other

Testing 25 degrees A.P.I. or more

Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils):

Fuel oils Nos. 2 and 3:

Diesel oil:

Containing not more than 15 ppm of sulfur

Containing more than 15 ppm but not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Other:

Containing not more than 15 ppm of sulfur

Containing more than 15 ppm but not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Other:

Containing not more than 15 ppm of sulfur

Containing more than 15 ppm but not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils):

Containing not more than 500 ppm of sulfur

Containing more than 500 ppm of sulfur

Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)

Kerosene-type jet fuel, motor fuel or motor fuel blending stock

Kerosene (except kerosene-type jet fuel, motor fuel or motor fuel blending stock)

Waste oils:

Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs)

Containing polychlorinated biphenyls (PCBs) at a concentration level of 50 mg/kg or more

Other, containing polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs), whether or not also containing polychlorinated biphenyls (PCBs) at a concentration level of less than 50 mg/kg

Other:

Wastes of distillate and residual fuel oils (whether or not blended):

Testing under 25 degrees A.P.I.

Testing 25 degrees A.P.I. or more

Wastes of motor fuel or of motor fuel blending stock

Wastes of kerosene or naphthas

Wastes of lubricating oils and greases (whether or not containing additives):

Of oils

Of greases:

Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin

Other

Other:

Mixtures of hydrocarbons not elsewhere specified or included, which contain not over 50 percent of any single hydrocarbon compound

Other

Liquefied:

Natural gas

Propane

Propane with a minimum purity of 90 liquid volume percent

Other

Butanes

Butanes with a purity of 90 liquid volume percent or more, but less than 95 liquid volume percent

Other

Ethylene, propylene, butylene and butadiene

Ethylene

Propylene

Butylene

Butadiene

Other

Ethane

Other

In gaseous state:

Natural gas

Other

Propane:

Propane with a minimum purity of 90 liquid volume percent

Other

Butanes:

Butanes with a purity of 90 liquid volume percent or more, but less than 95 liquid volume percent

Other

Other

Petroleum jelly

Paraffin wax containing by weight less than 0.75 percent of oil

Other:

Montan wax

Other

Petroleum coke:

Not calcined

Calcined

Petroleum bitumen

Other residues of petroleum oils or of oils obtained from bituminous materials

Bituminous or oil shale and tar sands

Other

Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)

I. CHEMICAL ELEMENTS