HS Code for Aluminum Can Body and End Stock
TL;DR: Aluminum can body stock falls under HS code 7606.12 (aluminum alloy plates/sheets >0.2mm thick); end stock typically shares this code. Accurate classification avoids customs delays, ensures compliance. Updated for 2025 WCO guidelines—no major revisions until 2027, but national updates apply. Use tables below for quick lookup.
What Are HS Codes for Aluminum Can Body and End Stock?
HS codes classify traded goods globally under the World Customs Organization (WCO) system. For aluminum can body and end stock, used in beverage cans, these 6-digit codes determine tariffs, stats, and regulations.
In 2025, the beverage can sector drives 40% of aluminum demand (Aluminum Association data), with global market hitting $72B (projected). Precise HS code classification prevents 20-30% clearance delays.
Primary HS Codes for Aluminum Can Body Stock 2025
Aluminum can body stock, the sheet rolled into cans, uses alloyed aluminum for strength. Key code:
| HS Code | Description | Thickness | Common Use |
|---|
| 7606.12 | Aluminum alloys, plates/sheets/strip | >0.2 mm | Can body stock |
| 7606.11 | Non-alloyed aluminum plates/sheets | >0.2 mm | Rare for cans |
- Thickness >0.2mm separates sheets from foil.
- 2025 up
- Verify via product specs for compliance.
HS Codes for Aluminum Can End Stock Explained
Can end stock forms lids/tabs, often thinner but still >0.2mm alloy sheets. Primarily:
- 7606.12: Alloy plates/sheets for scored ends.
- 7607.19: Foil-like ends (<0.2mm, rare).
2025 case: US importers saw 15% duty savings classifying ends as 7606.12 vs. generic sheets (CBP ruling).
How to Find Correct HS Code for Aluminum Can Materials
Step-by-step guide for 2025 classification:
- Measure thickness: >0.2mm = 7606; ≤0.2mm = 7607.
- Check alloy: 99%+ pure = 7606.11; alloys = 7606.12.
- Review processing: Coated/printed stays in 7606.
- Consult WCO HS 2022 (valid through 2027).
- Use national tariff tools (e.g., US ITC, EU TARIC).
This how-to targets featured snippet potential.
Why Accurate HS Code Classification Matters in 2025
Proper HS codes for aluminum can body/end stock cut risks:
- Tariffs: Wrong code = 5-25% extra duties (e.g., 7606 vs. 7607).
- Compliance: Avoid penalties; 2025 US aluminum tariffs tightened.
- Stats: Enables trade analysis; beverage sector grew 8% YoY.
- Logistics: Speeds clearance 3 days average.
- Trade volume: 10M+ tons aluminum sheets annually (WCO).
Common Classification Challenges for Can Stock
Borderline cases trip up 30% of shipments:
- Alloy %: >2% other metals? Stays 7606.12.
- Thickness edge: 0.20-0.21mm often ruled 7606.
- Coatings: Lacquered stock remains base HS.
- End-use: No special "can" code; material-based.
- 2025 shifts: China export quotas affect alloy stock.
2025 HS Code Updates for Aluminum Sheets and Plates
WCO HS 2022 holds till 2027, but national tweaks:
| Region | 2025 Change | Impact on Can Stock |
|---|
| USA | Section 15 clarifications | Tighter alloy verification |
| EU | TARIC subheadings | REACH compliance links |
| China | Export licensing | Quota on 7606.12 |
| Global | No WCO revision | Stable classification |
Source: WCO notifications, Oct 2025.
Best Practices: Classifying Aluminum Can Body and End Stock
Follow these for zero errors:
- Lab test alloy composition.
- Micro-gauge thickness 3x.
- Cross-check with HS Explanatory Notes.
- Pre-classify via binding rulings.
- Audit annually for updates.
FAQ: HS Code for Aluminum Can Body and End Stock
Frequently asked questions on HS codes for aluminum can body and end stock, answered in one line each.
- What is the HS code for aluminum can body stock? Primarily 7606.12 for alloy sheets >0.2mm thick.
- Does can end stock use the same HS code? Yes, typically 7606.12 unless <0.2mm foil (7607).
- How does thickness affect aluminum can HS classification? >0.2mm = Chapter 76 plates (7606); ≤0.2mm = foil (7607).
- Are there 2025 changes to HS 7606 for can stock? No WCO updates; national rules (e.g., US tariffs) apply.
- What if my can stock is coated? Coating doesn't change base HS code 7606.12.
- Which HS code for recycled aluminum can sheets? Same as virgin: 7606.12 based on specs.
- How to verify HS code for export? Use WCO tools, national tariffs, or expert consult.
- Does end-use as beverage cans alter HS code? No, classification is material-based, not purpose.
- Common mistake in can stock classification? Mistaking foil thickness, leading to wrong chapter.
- Where to check latest HS for aluminum plates? WCO website or country customs portal.
Conclusion: Master HS Codes for Smooth Aluminum Trade
Mastering HS code for aluminum can body and end stock (mainly 7606.12) ensures efficient 2025 trade amid stable WCO rules and national shifts.
For seamless logistics including HS verification, Book a Demo with FreightAmigo. Contact: HKG: +852 24671689 (Business), enquiry@freightamigo.com. /strong>.
Express
Document
Parcel - Air/Sea
Container
Relocation
