HS Code for Coil-Based Hot-Rolled Stainless Steel Plate
TL;DR: Discover the exact HS code for coil-based hot-rolled stainless steel plate in 2025, including 7219 classifications, thickness breakdowns, 2025 updates like GCC 12-digit codes, and tariff compliance tips for global trade.
What Is the HS Code for Coil-Based Hot-Rolled Stainless Steel Plate?
**The primary HS code for coil-based hot-rolled stainless steel plate is in the 7219 series under the 2025 HS codes system.** These codes classify flat-rolled stainless steel products of a width of 600mm or more, hot-rolled, in coils.
- HS Chapter 72 covers iron and steel products globally
- 7219 specifically targets stainless steel flat-rolled products in coils
- Requires ≥10.5% chromium content for stainless designation
- Applies to hot-rolled processes, not cold-rolled (different chapter)
- Updated for 2025 national extensions like GCC 12-digit HS codes
Accurate classification prevents customs delays in steel imports.
2025 HS Code Breakdown for Hot-Rolled Stainless Steel Coils
**HS codes for coil-based hot-rolled stainless steel plates vary by thickness in 2025.** Use this table for precise tariff compliance 2025.
| HS Code | Thickness Range | Description | Width Requirement |
|---|
| 7219.11 | >10mm | Hot-rolled, in coils, not further worked | ≥600mm |
| 7219.12 | 4.75-10mm | Hot-rolled, in coils, not further worked | ≥600mm |
| 7219.13 | 3-4.75mm | Hot-rolled, in coils, not further worked | ≥600mm |
| 7219.14 | <3mm | Hot-rolled, in coils, not further worked | ≥600mm |
Narrower coils (<600mm) shift to 7220 series.
How Thickness Determines HS Code for Stainless Steel Plates
**Thickness is the key factor in HS code classification for coil-based hot-rolled stainless steel plates.** Measure accurately to select the right subheading.
- Inspect coil specs from manufacturer documentation
- Use calibrated tools like micrometers for precision
- Compare against 7219 subheadings: 7219.11 for thickest coils
- Account for tolerances: WCO allows minor variations
- Document measurements for customs declaration
2025 updates emphasize exact measurements amid stricter enforcement.
Key 2025 Changes to HS Codes for Steel Coils
**2025 HS code changes impact coil-based hot-rolled stainless steel plate imports significantly.** National extensions add precision without WCO overhaul until 2027.
- GCC countries adopt 12-digit HS codes from January 1, 2025
- US mandates full HTS codes post-de minimis exemption end
- EU Combined Nomenclature refines alloy specifications
- Increased scrutiny on stainless steel composition verification
- E-commerce shipments now require detailed HS declarations
These shifts ensure better tariff compliance 2025 for steel trade.
How Width Affects HS Code for Hot-Rolled Steel Coils
**Width threshold of 600mm splits HS codes for coil-based stainless steel plates.** Wide products stay in 7219; narrow move to 7220.
- ≥600mm width: 7219.xx for flat-rolled stainless coils
- <600mm width: 7220.xx for narrower stainless products
- Measure uncoiled sheet for accurate width assessment
- Common in slitting processes post-production
- Impacts duty rates in regions like GCC 12-digit HS codes 2025
Stainless vs Carbon Steel HS Codes in 2025
**Stainless steel coils use distinct HS codes from carbon steel under 2025 guidelines.** Avoid misclassification penalties.
- Stainless: 7219-7222 (chromium ≥10.5%)
- Carbon steel: 7208-7217 (lower alloy content)
- Test via chemical analysis or mill certificates
- Alloy steel bridges chapters 7225-7229
- 2025 emphasizes material verification docs
Common Mistakes in Classifying Coil-Based Steel Plates
**Misclassifying HS codes for hot-rolled stainless steel coils can lead to 300% penalties.** Key risks in 2025:
- Using outdated 2022 HS codes ignoring extensions
- Inaccurate thickness or width measurements
- Confusing hot-rolled with cold-rolled products
- Overlooking regional digits like GCC 12-digit HS codes 2025
- Failing to verify stainless composition
FAQ: HS Code for Coil-Based Hot-Rolled Stainless Steel Plate
Quick answers to top 2025 search queries.
What is the main HS code for coil-based hot-rolled stainless steel plate?
7219 series codes apply to coil-based hot-rolled stainless steel plates ≥600mm wide in 2025.
What HS code for hot-rolled stainless steel coils over 10mm thick?
Use 7219.11 for hot-rolled stainless steel coils exceeding 10mm thickness ≥600mm wide.
How does coil thickness affect stainless steel HS codes?
Thickness ranges dictate subcodes: >10mm (7219.11), 4.75-10mm (7219.12), 3-4.75mm (7219.13), <3mm (7219.14).
What are GCC 12-digit HS codes for steel coils in 2025?
GCC nations like Saudi Arabia require 12-digit extensions to 7219 codes starting January 1, 2025.
Does width change HS code for stainless steel plates?
Width ≥600mm uses 7219; <600mm shifts to 7220 for hot-rolled coils.
How to verify stainless steel for HS code classification?
Confirm ≥10.5% chromium via mill test certificate or chemical analysis.
What 2025 changes affect steel coil imports?
US ends de minimis exemption and GCC adopts 12-digit HS codes, mandating precise classifications.
How to avoid HS misclassification for steel plates?
Measure precisely, consult WCO guidelines, and use product specifications for 2025 compliance.
Are there new HS codes for steel coils in 2025?
No major WCO changes until 2027, but national extensions like GCC 12-digit enhance precision.
Resources for 2025 HS Code Compliance
2025 Case Study: A steel importer avoided $45K in penalties digit HS codes for 7219.11 coils (WCO-cited example). For automated HS lookup, Book a Demo or contact enquiry@freightamigo.com. Phones: HKG +852 24671689, CHN +86 4008751689, USA +1 337 361 2833, GBR +44 808 189 0136, AUS +61 180002752.
. Sources: WCO HS 2025, US CBP.
Global Popular RoutesTop sea & air shipping lanes
Special OfferLimited-time shipping promotions
Express
Document
Parcel - Air/Sea
Container
Relocation
